APC BGM2200B-UK uninterruptible power supply (UPS) Line-Interactive 2.2 kVA 1320 W 4 AC outlet(s)

Login for pricing
In Stock
17 available
  • APC Back-UPS Pro for Gaming
  • 2200VA/1320W
  • Tower
  • 230V
  • 2x UK and 2x IEC C13 outlets
Add to Compare
SKU #: BGM2200B-UK
EAN #: 0731304634782
UNSPSC #: 39121011
Cold-start capable
Provides temporary battery power when the utility power is out.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.

LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
SKU BGM2200B-UK
EAN 0731304634782
Specification
Power
Output power1320 W
Input operation voltage (min)168 V
Input operation voltage (max)302 V
Maximum current12 A
Output power capacity2.2 kVA
Ports & interfaces
Cable length1.5 m
USB portYes
AC outlets quantity4 AC outlet(s)
AC outlet typesIEC 60320, Type G (BS 1363)
Power plugType G
Performance
UPS topologyLine-Interactive
WaveformSine
Automatic Voltage Regulation (AVR)Yes
Response time10 ms
Noise level45 dB
Features
UPS topologyLine-Interactive
WaveformSine
Automatic Voltage Regulation (AVR)Yes
Response time10 ms
Output power1320 W
Input operation voltage (min)168 V
Input operation voltage (max)302 V
Maximum current12 A
Noise level45 dB
Output power capacity2.2 kVA
Input frequency50/60 Hz
Battery
Battery life (max)5 year(s)
Battery voltage24 V
Battery technologyLead-Acid
Battery recharge time16 h
Typical backup time at half load6.75 min
Typical backup time at full load0.5 min
Cold startYes
Automatic battery testYes
Design
International Protection (IP) codeIP20
Form factorTower
Product colourBlack
Cable length1.5 m
Display typeLCD
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage relative humidity (H-H)0 - 95%
Weight & dimensions
Package width355 mm
Package depth480 mm
Package height155 mm
Weight12.3 kg
Width104 mm
Package weight14.5 kg
Height292 mm
Depth409 mm
Packaging data
Package width355 mm
Package depth480 mm
Package height155 mm
Package weight14.5 kg
Manufacturer APC
PDF Url https://objects.icecat.biz/objects
In Stock Y